So you got part of it for sure. The hubs on a Titan (those are Titan wheels) are like 77 something, nearly 78. Your Xterra is 66.1. So you may need hub rings. My concern would be the offset of those wheels since that set up is about 2" taller than stock and damn near a 33.
most part yes, ill link this other set that i found bc i just actually noticed that they're on a xterra that is getting parted out hopefully a steal lol
Good idea. From that screenshot you can see that his plastics are removed, and it looks like the fronts are trimmed pretty heavily. Id say that his front is lifted as well. Definately could make those work, with some work.
For sure I leveled the stance when i replaced my passenger control arm with the torsion bars so i Imagine some of the bumper will need to go, maybe even lift.
Your main concern is going to be the front auto hubs (assuming you're 4wd). They're pretty big and requires a large center bore on the wheels. Now. You could eliminate them with drive slugs off of an 04 Pathfinder. And then they wouldn't be a concern anymore but your mileage will suffer since the front axle will be rotating all the time.