Trying to updated this thread with photo, Borrowed from Me posting on the other site..
From YOUTUBE:
View: https://www.youtube.com/watch?v=C3qCwHOdpUk&t=1s
The cable running to the Outside handle.. Has too much flex. Which does not allow the Cable end on top( blue ball) to Retract.
Zip tied the Cable to other cable that felt stiff & secure. WORKS!!!!!
(RED arrow to Zip tie, Green line is the Cable running to the Outside door handle.)
Dam thing did not held... Too cold to fix. three months later warm sunshine..
Update:
On side Frame, two rubber access grommets. Remove Bottom one. Can see a arm that holds the cable in place. ( ARM has a " Y " at the end ). Fits the collar on the White part of the cable.
Mine was OUT... dammit!!!.
Too deep to reach with Needle nose. using Flashlight, screwdriver Wiggle the cable in the door panel. THUMP back into arm's slot!!.. DONE.
works!!!. Cough for now!.
once again.. working.. Till it pops off. Just need to find Tool that will fit inside with out yanking Panel's off.
Two Beers required for Repair.. One whiskey for your Buddy that is bitching at yea To hurry up... haha