Pic request: shackles and torsion cranked

[FFPEAVES]

Does anyone have a pic of a gen 1 with only shackles and torsion cranked up by chance???

 

[AZhiAZiAM]

Look at mine I do have ac ucas though

 

[Davcos]

PML with 31" tires

 

[FFPEAVES]

Can you tell a big enough differance with just shackles and torsion cranked as far as look and everything?

 

[DJQuin]

I just finished up the PML, granted I had the BL already, but the before and after pics may help visualize as well. Check the build thread.

 

[KChurch86]

Before PML:

After PML:

Tires are 31x10.5x15 Interco MT's for reference.

 

[FFPEAVES]

Church how much lift it give u exactly

 

[KChurch86]

Church how much lift it give u exactly

I got a little bit more than 1.5", probably about 1.75" total. I should note that I also used the adjustable lift shackles from AC as opposed to the standard PML lift shackles. I went to one hole below full lift.

 

[march490]

@KChurch your PML looks good. The front looks like you got a lot out of it. How much space between the bump stop do you have? I have a 1/2 inch gap on my bump stops. Here's a pic of my PML (AC Shackles) with 31" Tires.


Sent from my Amazon Kindle Fire HD using Tapatalk

 

[robcarync]

Church, you ever get UCAs for the front so you can max out the adjustable shackle? Haven't seen too many people go the adjustable shackle route...I went that route with UCAs a couple years ago and haven't been disappointed

 

[KChurch86]

@KChurch your PML looks good. The front looks like you got a lot out of it. How much space between the bump stop do you have? I have a 1/2 inch gap on my bump stops. Here's a pic of my PML (AC Shackles) with 31" Tires.
View attachment 1992

Sent from my Amazon Kindle Fire HD using Tapatalk

Thanks man. I got a decent amount of lift out of it, though technically I went more than you're supposed to. I'm running the ultra-low profile bump stops and I've got about 1/2" - 5/8" gap.

Church, you ever get UCAs for the front so you can max out the adjustable shackle? Haven't seen too many people go the adjustable shackle route...I went that route with UCAs a couple years ago and haven't been disappointed

I haven't, I'd like to get UCA's but I won't be doing so any time soon, if ever. I went with the adjustable shackles because I bought them off a member for pretty cheap.

 

[ddddddd]

Before:


After:

I measured the heights before and after the PML and new tires. Here are the results:

	Left	Right
Before	15 1/4"	15 1/16"	Front
After	17 1/2"	17 5/8"	Front
Gain	2 1/4"	2 9/16"
Before	17 1/4"	17 1/8"	Rear
After	20"	20"	Rear
Gain	2 3/4"	2 7/8"

Final rakes:

Back to Front: 2.5"
Left to Right: 1/8"

I really like how it sits now.

 

[FFPEAVES]

Ok does anyone have a pic of a gen 1 with pml , bl , and only 31's by chance??

 

[TheFauxFox]

I have 31" and a PML. Will that work?

 

[ddddddd]

I have 31" and a PML. Will that work?

I think he is trying to compare PML only to PML + BL.

That said, go ahead and throw up your pics of your PML only, it can't hurt.

 

[FFPEAVES]

Yea basically I want an idea of how it will look when I install both my lifts this weekend and see if it will look funny and if I can pull it off or if I will have to go 33's

 

[Roadwarrior]

With a body lift, you will want 33s. My 265s looked small when I put the BL on

Sent from space and stuff

 

[Jack Stilts]

With a body lift, you will want 33s.

This. Body lift and 33s go hand in hand like chocolate and peanut butter.

 

[XBetty]

Ok does anyone have a pic of a gen 1 with pml , bl , and only 31's by chance??

This is mine with a 3" BL, 1.5" PML and 32's

 

[01XterraPhilly]

Calmini shackles with torsion bars cranked on 31s

 

[Thanks48]

You saw mine at bigfork/prentice trip I have 31s

Sent from my SAMSUNG-SGH-I317 using Tapatalk

 

[Macland]

I fixed your title, maybe you'll get a few more pics with the descriptive title.