Prime'z X²

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
Current picture
20210925_112335.jpg

Current Mods: Updated 10.02.21
--------------------------------------
Mods are clicky for pictures and information

Armor:
- White Knuckle Sliders
- Shrock Front Bumper
- Shrock Rear Bumper
- Shrock Skids (Painted Blue)

Lift, Suspension, Driveline, & Brakes:
- 4" Titan Swap
- Radflo 2.0 Titan Swap Coilovers with 650lb/in springs
- PRG Titan UCAs
- +4" +800lbs Alcan Leaf Springs
- PRG Adjustable shackles
- 2" Body Lift
- Rear Bilstein 5125s
- Complete Titan rear axle w/ 4-pin locker and 4.56 gears
- M205 w/ 4.56 Gears
- Complete 2006 Titan brake package (13" Front rotors/11.5" rear rotors)
- Titan Brake Booster and Master Cylinder
- 315/70/17 Cooper STT Pro Tires
- 17x8 OE Titan wheels refinished in gunmetal

Interior:
- 09 Dash Swap w/ 5-Switch Fronty center stack
- LED Dome lights
- Center stack LEDs swapped to white
- Complete Leather seat covers w/ heaters
- Dynamat Xtreme laid on the inside of the roof
- 09 BT Overhead Console w/ Custom Carling Switches for all things lighting
- JDM Terrano Inclinometer

Electrical:
- Bussman fuse/relay box under back seat
- Uniden Bearcat 880 CB Radio
- OEM Locker bypass w/ OTR switch replacement
- Android head unit with OE Rockford Fosgate system
- Added through-the-roof wiring for Alley lights, High Mount Reverse Lights, & Roof Boobs

Exterior:
- Exterior LED swap complete
- Offroad Gorrilla Hood Strut Kit
- 2009+ Front grill / Flat black
- Flat black vinyl roof
- LED Alley Lights on roof rack rails
- Pro4X Roof Boobs with JW Speaker 8415 LED Headlights

General Stuff:
- CSF Aluminum Radiator
- Timing chain shoes replaced/upgraded
- New IPDM swapped in
- Jim Wolf Organic Clutch & Lightweight Flywheel


In the Garage Waiting to be Installed:
- Snorkel

Plans:
- Complete LED exterior illumination package
- Dephep Rack
- Gobi Ladder
- Complete LED swap on cluster and center stack to white (goodbye orange!)
- HID Retrofit
- Winch
- Replace all OE switches w/ Carling rockers

So much more to come. This is gonna be fun.

------------------------------------------------
Stock Pictures

Oznc8gS.jpg


AihMdpP.jpg


g7yCluY.jpg


kj0sYTE.jpg


Imma make a big biatch out of this.

Base specs:
6-speed (duh)
RF System
Stocky stock-stock
116k miles
 
Last edited:

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
Thanks guys.

Started putting together parts for the dash swap. I need to change the head unit, so the dash and center stack needs to be done at the same time. Got the 2009+ radio bezel and climate controls coming. Now I need the outer bezel w/ vents. Looks like I need those from the dealer. Can't find them anywhere on eBay and Courtesy Parts has the bezel for $150, so I should be able to get it cheaper from my contact. I've also got a replacement 4wd switch on the way so I can take it apart and figure out how to change the illumination.

I also realized that I need to do it in window switches ugh..

Thankfully, my steering switches don't light up.

Also, I think I'm going to swap the gauge face to the later model / pathy setup. No little circles around the idiot lights and a silver bezel around the 4 major gauges. Much cleaner look, but exact same setup.
 

GPD605X

Lockers Installed
Founding Member
Location
Gulfport, MS
Freaking awesome!!! Glad you finally joined in the 2nd Gen Club! Can't wait to see what the dash and gauges look like! I just might have to send you mine! haha. So stoked!
 

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
Nice! My favorite part? The midnight blue wrap.
Yeah. I can't wait.

Found an 08 Pathy speedo cluster for cheap. So that's coming too. Also going to remove the LED for the TPMS. It's a primitive system compared to the one in the wife's truck. And since I can't actually see the pressures anywhere, it's not self clearing, and floatation size tires will be run about 30lbs anyway... The entire system is useless to me.
 

drbandkgb

Titan Swapped / SAS'd
Founding Member
Food for thought.. Don't set the bils at full 2".. The ride is bad and will blow the shocks. I recommend setting them at 1" and using a 1" top plate spacer
 

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
So. Happy moment.

I have a hatred for red turn signals. I can't stand them. I think they're stupid and I had this big elaborate plan for fixing this on the truck.

It involved rewiring the tail lights so that the reverse light was both reverse and the turn signal. And then the old turn signal was the brake light.

Turns out none of that is necessary.

The amber LEDs shine beautifully through the red lens!

de089f2d9508aa278e17985d1bbd2bb5.jpg


I never would have thought.

Still need to do the front lights and load resistors. But the rear is done.
 

GPD605X

Lockers Installed
Founding Member
Location
Gulfport, MS
Nice! You're making me jealous of all these things your doing! I haven't done anything in a while to mine.


Sent from my couch
 

caseycamby

Suspension Lift
Location
Marion, NC
I've thought about redoing my lights as well. Maybe running amber and the signal wiring to my reverse lights and just using the LEDs for reverse lights.. maybe one day when I'm bored haha
 

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
Soooooo its for asthetics?
Yes. And it's easier to ditch the orange dash illumination on the newer stuff. And instead of 4 fan speeds you get unlimited fan speeds.

But mostly it's more visually appealing. The climate knobs are so chunky and clunky. It's just ugly.
 
Top