R
ryandavenport
Guest
Cost: $420 plus shipping
Producer: White-Knuckle Off Road http://www.white-knuckleoffroad.com/nissanxterra.htm
Style/Options: Kickout at rear tire, DIY bedliner
Full coverage: Yes
I will try to get a better picture later.
Producer: White-Knuckle Off Road http://www.white-knuckleoffroad.com/nissanxterra.htm
Style/Options: Kickout at rear tire, DIY bedliner
Full coverage: Yes
I will try to get a better picture later.
Last edited by a moderator:
- Location
- Idaho!
Cost: ~$400
Producer: Hefty Fabworks
Style/Options: Rounded, w/ treadplate
Full Coverage: Yes
![294307_573625947273_43200402_32070941_109264462_n.jpg](https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/294307_573625947273_43200402_32070941_109264462_n.jpg"]https://fbcdn-sphotos-a.akamaihd.net/hphotos-ak-ash4/294307_573625947273_43200402_32070941_109264462_n.jpg)
Producer: Hefty Fabworks
Style/Options: Rounded, w/ treadplate
Full Coverage: Yes
- Location
- Lancaster, Pa
Custom made from drill steel. About $200 total.
Last edited by a moderator:
- Location
- Columbus OH
I dont think that they have a thick enough wall, sure that you couldnt find anything thicker????
- Location
- Lancaster, Pa
Haha, yeah they may be a bit of over kill but the price was right. (free)
- Location
- Columbus OH
Hay I have a motto that works very well for me
"if you can build it, you can over build it"
"if you can build it, you can over build it"
- Location
- Columbus, OH
Some more NX Rocks stuff - the solid ones. Now made by Hefty.
Potentially about to get used. Can't remember if I hit on this one or not.
Potentially about to get used. Can't remember if I hit on this one or not.
Last edited by a moderator:
R
ryandavenport
Guest
I will try to get some more tomorrow Diadaga.
- Location
- SW OK & formerly Eastern NM
RockyMtnX:
NOT MINE
This is with a step option.
and here are some without the step option.
NOT MINE
This is with a step option.
and here are some without the step option.
Last edited:
- Location
- SW OK & formerly Eastern NM
Sorry for the confusion, no these aren't mine. I was just adding to the options. I do have every intention of getting these with the step. I've contacted RockyMtnX and now I just need to finagle my way into getting them
. My wife has been complaining about having a hard time getting in the X and once I get the lift it'll be even worse.Huh? I HAVE NO IDEA WHAT THAT WOULD BE LIKE, LOL
Got mine and that ended, but not so much when she has to climb in the back seat, kinda but not so muchBubba
Test Drive
- Location
- Menifee, CA
Cost:
$100 Scrap Metal
$50 Tools and gear
Producer:
Myself
Style/Options:
Based on several ideas I got from here :happy:
Full Coverage: Yes
$100 Scrap Metal
$50 Tools and gear
Producer:
Myself
Style/Options:
Based on several ideas I got from here :happy:
Full Coverage: Yes
Last edited by a moderator:
great jobCost:
$100 Scrap Metal
$50 Tools and gear
Producer:
Myself
Style/Options:
Based on several ideas I got from here :happy:
Full Coverage: Yes
- Location
- SW OK & formerly Eastern NM
Cost: doesn't look like they are available on the site anymore
Producer: Nisstec
Style/Options:
Full Coverage: Yes
Producer: Nisstec
Style/Options:
Full Coverage: Yes
Last edited by a moderator:
SkyPainter
Test Drive
- Location
- Stoneham, MA
I just cancelled my order for the stock step rails for my new 2014 Xterra Pro 4-X. They were decorative, and crap. I need real Sliders with a step for "She-who-must-be-obeyed" to be able to get up into the cab. Suggestions??"
- Location
- SW OK & formerly Eastern NM
Those white knuckle ones look like they have a good step. Maybe someone with them will chime in. Mine don't have nearly as much step room as I'd like.
akinc
Skid Plates
- Location
- Dayton, Tennessee
The White Knuckles have a good step. They help my 12 year old get in the back seat and my wife get in the passenger seat. I'm lifted about 4 inches and sometimes I need a little help getting in and the WKs work like a charm.
Sent from seXTERRA World Headquarters
Sent from seXTERRA World Headquarters
- Location
- All over PA
Shrockworks 2 bar support
$460
Full coverage: In my opinion, no. There is a small 1.5" section on rear that concerns me.
In all honesty, it doesn't function well as a step. But that wasn't reason for purchase. Sent via my walkie talkie
$460
Full coverage: In my opinion, no. There is a small 1.5" section on rear that concerns me.
Last edited by a moderator:
- Location
- SW OK & formerly Eastern NM
Let's get some examples of the p & p and boulder iron works on a truck.
- Location
- West Haven, UTAH
I'm doing the MaX-Gear sliders again.
Three tube tie-in and forward brace standard, 2" BL option, powder coated $470.
Dave
Three tube tie-in and forward brace standard, 2" BL option, powder coated $470.
Dave
Last edited by a moderator:
- Location
- Gulfport, MS
^^^ Those are freaking awesome! I'd have them not at such an angle as for a step but that's my preference. But those are damn sexy man.
Mr Bills
Bought an X
- Location
- Area Code 530
zombie slayer
Test Drive
- Location
- Virginia
New to the site..just wanted to say nice work to all of you..all of them look bada$$
SkyPainter
Test Drive
- Location
- Stoneham, MA
===> Welcome, Slayer! This seems to be a well-run, knowledgeable, and awesome Xterra forum!
~ SkyPainter - New 2014 Xterra Pro-4X. Just beginning mods.
SkyPainter
Test Drive
- Location
- Stoneham, MA
===> The WKs look good...wondering if they can move the step for the front seat. (Will get Diamond Plate). Also wondering If I can install them myself, or need another person to help?
~ Sky
~ Sky
These are the Boulder Ironworx sliders. Function is great, at 6'1" I don't need much of a step to get in so I can't really speak towards ability to use it as a step getting in. It's tucked a little close to the body to make a good exit step however. The dimpled plate does give good traction for what little of my size 12 boot fits on it though.
Sent from CoSprings
A floor jack and jack stands should do the trick. But I'm down to help if you need it.
I just painted my sliders and ill be welding them in this week.
Sent from my EVO using Tapatalk
SkyPainter
Test Drive
- Location
- Stoneham, MA
===> Thanks!!! I'll see how things work out with White Knuckle on making/moving the 'step'. This is gonna be fun!
