Finally the moment a lot of you have been waiting for, all the tools laid in the foam
As you can see I do not have a lot of tools I should or would like to have in my box... The plan at a later time will be to make a second layer with some other sockets(the traditional kind not like the pass through kind I have), a breaker bar and some extensions. Then maybe one of those screw drivers with the hex heads that you can change out for any little magnetic piece.
The only problem with the second layer is the fact that using the wrench gripper raises it up. I originally put them at that angle so I could clear the air struts mount to the floor of the box which I didn't do. I also didn't get all my tools very close. So next winter I may buy a new set of this time black and red foam and re-cut out all my tools much closer and with more tools!
Lastly you will notice I have a lot of screw drivers phillips and flathead well I bought a 27 pack for cheaper then my dad bought his 5 or 6 screw drivers. So I used them for all the various sizes figured why not!
Also next I will be adding a long grab handle to the front which hopefully I can use for other things like tying a garbage bag too or using as towel rack, etc... Just gotta find one I like!
Also I am still not sure about these screws I like them but they do stick up and tend to catch your arm when your using the lid as a work surface so I may use of the sunken ones instead.
Lastly I will give you a couple of other various pics! This is how the legs/feet are mounted to the utility track! I really wanted use the slot to adjust the rack back and forth but because of the way I did everything I ended up only getting them just to the very edge of the utilitrac! One bolt up side down, eventually I will flip these and use some grade 8 bolts and washers but right now it's plenty strong!
This is the front one, as you can see I barely lucked out! But I did find if I lay the seats down and slide the rack forward I can use the trunk still without taking the rack completely out and I just have the back 2 legs bolted it. I really love these feet so if I do redo the rack in the future I will use these feet again
Here is a pic of my HAM radio antenna, random I know but I thought I would share!
Also I painted my spare set of Lightforce covers black! Just an added touch, I will most likely leave these on during winter and during summer leave on the clear covers.
And last but not least just a random pic of the emblem!
Hope you guys enjoyed some pics again after a very very long time!