GB PENDING: InSain Fab 1st & 2nd Gen Tax Season Group Buy ~ Starts 2/1 - 3/15, 2015

[Boogieman]

Can we put me down for a rear tire carrier for first gen with powder coat ... oh and with hi lift mount

 

[Possum4757]

Put me down for a 40" light bar mount. gen2

 

[InSainFab]

Timrich is thinking about the pre-runner bumper and I'm thinking about the rear bumper. I saw you mention above $95 to Florida. Him and I live a couple miles apart, what would be the shipping cost to throw those two orders together (32810)? The pre-runner bumper looks good, going to have any installed pictures?

Honestly the Prerunner bumper gets a large package fee of $50 because of dimensional weight. Likely best to ship that by itself greyhound freight. As the bumpers are broke down and shipped ground for around $100.

I'll be in for a 2nd Gen rear bumper with rotopax mounts. I'll have to call the shop to get a few other things.

Sounds good!!! Go ahead and PM me here or on Facebook for any added needs.

Could I pay with Visa?

I can send a paypal invoice, don't have to log in and you can just punch in your CC info like any other online transaction.

Can we put me down for a rear tire carrier for first gen with powder coat ... oh and with hi lift mount

Adding

Put me down for a 40" light bar mount. gen2

Adding

 

[Firefighter4607]

Did you receive my payment?
Invoice:0036

 

[InSainFab]

Received

 

[Malin_Rebate]

What would shipping to tennessee be for a gen 1.5 40 inch lightbar mount?

 

[InSainFab]

$12

 

[Malin_Rebate]

put me down for a 40 inch mount gen 1.5

 

[doo]

Any pictures of the 2nd gen rear bumper without the swing arm? Curious to know if the recovery points are mounted different and if a hole/mount is included for the 7pin connector.

 

[maillet282]

The hole for the 7 pin is on the underside of the bumper to the left of the hitch.

 

[doo]

sweet, thank you! That's how I mounted mine on the stock bumper too.

 

[DC xterra]

is the light bar mount powder coated black like the bumper?

 

[InSainFab]

put me down for a 40 inch mount gen 1.5

Adding

Any pictures of the 2nd gen rear bumper without the swing arm? Curious to know if the recovery points are mounted different and if a hole/mount is included for the 7pin connector.

No pictures yet, but it will be the rear bumper just w/o the swing arm.

is the light bar mount powder coated black like the bumper?

Yes

 

[InSainFab]

Updated Orders List, OP has been updated.

CONFIRMED List, Items Will Ship as Ready in this Order (PAID $$) :

$$: Rear Bumper, Standard Sliders (RAW)
$$: Rear Bumper w/ Rotopax Brackets
$$: Rear Bumper (RAW)
$$: Rear Bumper w/ Rotopax Brackets
$$: Standard Sliders (RAW)
$$: Standard Sliders (RAW)
$$: Front Plate Bumper w/ Hoops and Quad Fog Lights and Red Shock Skids
$$: Rear Bumper w/ Rotopax Brackets & Rear Corners
$$: Rear Bumper w/ Rotopax Brackets
$$: Front Tube/Diamond Plate Bumper w/ 4" LED's, Rear Bumper & Rear Corners
$$: Front Plate Bumper, Factory Fog Holes, Headlight/Grille Hoops, 22" Flood LED (Add Flood Reflectors to make bar 100% Flood) Need to Add KC Covers
$$: Rear Bumper and Red Shock Skids
$$: Rear Bumper w/ RotoPax Brackets and Red Shock Skids
$$: Rear Bumper w/ RotoPax Brackets (RAW)
$$: Rear Bumper, Rear Corners
$$: Rear Bumper w/ Rotopax Brackets
$$: Rear Bumper w/ Rotopax Brackets
$$: Rear Bumper and Black Shock Skids
$$: Rear Bumper
$$: Sliders (RAW)
$$: Rear Bumper w/ Rotopax Brackets (2-2gal.), Front Slotted Bar
$$ Rear Bumper w/ Rotopax Brackets (RAW)
$$: Rear Corners and Black Shock Skids
$$: Sliders
$$: Rear Bumper NO Carrier
$$: Front Plate Bumper w/ Single Spot Lights (RAW)
$$: Sliders (RAW)
$$: Rear Corners (RAW)
$$: Front Plate Bumper w/ 22" Bar and Quad 3" Lights, Rear Bumper w/ Rotopax Brackets (RAW)
$$: Rear Bumper w/ Rotopax Brackets and Red Shock Skids
$$: Rear Corners
$$: Front Plate Bumper w/ 22" Bar and Quad 3" Lights
$$ Jason Wellman: 1st Gen Rear Bumper
$$ J Everett: Front Plate Bumper w/ Holes for 22" LED, 3" Fogs and Factory Fogs (RAW)
$$: Front Plate w/ Quad Lights and Rear Bumper w/ Rotopax Brackets
$$: Rear Carrier w/ Rotopax Brackets
$$ 02Xterra: 1st Gen Rear Carrier
$$ Firefighter4607: 1st Gen Sliders (RAW)
$$: Rear Corners
$$: Rear Bumper w/ Carrier, Rear Corners w/ Lights and Sliders
$$ Trexterra: Front Tube/Diamond Plate w/4" Fogs
$$ kaytiejean05: Rear Bumper w/ Carrier

: Rear Bumper w/ Rotopax Brackets and Rear Corners payment info sent
Mike Nichols: Rear Corners w/ Flush Mounts payment info sent
: Rear Bumper w/Rotopax Brackets payment info sent
Reshmax00: 1st Gen Rear Bumper (RAW) payment info sent
: Rear Bumper w/ Rotopax Brackets payment info sent
: Rear Bumper w/ Rotopax Brackets payment info sent
: Front Plate Bumper/No Hoops w/ Quad 3" Lights, Rear Carrier w/ Rotopax Brackets, Rear AL Corners w/ Lights payment info sent
Fixitguy: Front Plate Bumper w/ Factory Fog Holes, 22" Light Bar w/ 2 Lamp harness and Rear Carrier w/ Rotopax Bracket payment info sent
mudchet: Rear Bumper payment info sent
schmidt1894: 1st Gen 40" Light Mounts payment info sent
: Rear Carrier w/ Brackets payment info sent
cgregg: Front Plate Bumper w/ Factory Fogs and 22" Light Bar payment info sent
Gentsjack7: 1st Gen Rear Bumper payment info sent
DC xterra: 1st Gen Rear Bumper w/ Rotopax Brackets and 40" Light Mount payment info sent
: Rear bumper w/ Rotopax payment info sent
SpongeX: Rear bumper w/ Rotopax (2 CB Tabs) payment info sent
Boogieman: 1st Gen Rear Bumper payment info sent
Possum4757: 40" Light Mounts payment info sent
: Front Plate Bumper w/ 3" Holes payment info sent
: Rear Carrier and Black Shock Skids payment info sent
: Front Plate w/ Quad 3" and 22" Light Bar, Rear Carrier w/ Rotopax Brackets and Red Shock Skids payment info sent
: Rear Corners payment info sent
Malin_Rebate: 1st Gen 40" Light Mounts payment info sent
: Sliders payment info sent

 

[DC xterra]

did not receive payment info yet

 

[KBC]

Interested in seeing pics of a first gen plate bumper.

 

[CaptainMorgan_SOS]

Put me down for a 1.5 gen windshield 40" lightbar mount. I would prefer it to not be powdercoated.

 

[Boogieman]

Sent payment yesterday. Can I get a rough estimate of shipping to 98373 zip code. Even guess high and send back whatever the overage was... but I really want to get my carrier fully paid for including shipping (bumper itself is paid)

 

[schmidt1894]

Put me down for a 1.5 gen windshield 40" lightbar mount. I would prefer it to not be powdercoated.

OOOOOOOOOOooooo... you copying me bro!? haha. I can't wait for it!

Insain-Will be paying via quickpay Feb 14.

 

[schmidt1894]

Insain Fab...

I paid earlier this morning via Chase QuickPay. Please let me know if you got it. Also, will I get some money back since the GB price went down? Will you guys do that later on..?

 

[InSainFab]

Please let me know if you see any errors. Thank you



CONFIRMED List, Items Will Ship as Ready in this Order (PAID $$) :

$$ jdunker26: Rear Bumper (RAW)
$$ sanders: Rear Bumper w/ Rotopax Brackets
$$ Jordan: Rear Bumper (RAW)
$$ D'Rock: Rear Bumper w/ Rotopax Brackets
$$ columb0: Front Plate Bumper w/ Hoops and Quad Fog Lights and Red Shock Skids
$$ H.I. McDunnough: Rear Bumper w/ Rotopax Brackets & Rear Corners
$$ snowtrout: Rear Bumper w/ Rotopax Brackets
$$ cutfromabove: Front Tube/Diamond Plate Bumper w/ 4" LED's, Rear Bumper & Rear Corners
$$ zball94: Front Plate Bumper, Factory Fog Holes, Headlight/Grille Hoops, 22" Flood LED (Add Flood Reflectors to make bar 100% Flood) Need to Add KC Covers
$$ maillet282: Rear Bumper and Red Shock Skids
$$ jakedublu: Rear Bumper w/ RotoPax Brackets and Red Shock Skids
$$ Quest4ADV: Rear Bumper w/ RotoPax Brackets (RAW)
$$ Yorkdriver: Rear Bumper, Rear Corners
$$ Jesse Davis: Rear Bumper w/ Rotopax Brackets
$$ Wildcard1: Rear Bumper w/ Rotopax Brackets
$$ Blk11Xterra: Rear Bumper and Black Shock Skids
$$ JeffPro4X: Rear Bumper
$$ dkoch7: Rear Bumper w/ Rotopax Brackets (2-2gal.), Front Slotted Bar, Black Shock Skids
$$ NWX: Rear Bumper w/ Rotopax Brackets (RAW)
$$ GuerillaXT: Rear Corners and Black Shock Skids
$$ Expaladin: Sliders and Red Shock Skids
$$ User Omega: Rear Bumper NO Carrier
$$ rthinchey: Front Plate Bumper w/ Single Spot Lights (RAW)
$$ Travzilla: Rear Corners (RAW)
$$ Pro-4Xtreme: Front Plate Bumper w/ 22" Bar and Quad 3" Lights, Rear Bumper w/ Rotopax Brackets (RAW)
$$ Rebelgd: Rear Bumper w/ Rotopax Brackets and Red Shock Skids
$$ npgtech: Rear Corners
$$ cblaxx19: Front Plate Bumper w/ 22" Bar and Quad 3" Lights
$$ Jason Wellman: 1st Gen Rear Bumper
$$ J Everett: Front Plate Bumper w/ Holes for 22" LED, 3" Fogs and Factory Fogs (RAW)
$$ Brambleheart: Front Plate w/ Quad Lights and Rear Bumper w/ Rotopax Brackets
$$ joelwho: Rear Carrier w/ Rotopax Brackets
$$ 02Xterra: 1st Gen Rear Carrier
$$ Firefighter4607: 1st Gen Sliders (RAW)
$$ Vorian: Rear Corners
$$ soldier92r: Rear Bumper w/ Carrier, Rear Corners w/ Lights and Sliders
$$ Trexterra: Front Tube/Diamond Plate w/4" Fogs
$$ kaytiejean05: Rear Bumper w/ Carrier
$$ Kiska2: Front Plate w/ Quad 3" and 22" Light Bar, Rear Carrier w/ Rotopax Brackets and Red Shock Skids
$$ unixmandt: Front Plate Bumper w/ 3" Holes
$$ Yukonart: Sliders
$$ ckline1: Rear Carrier and Black Shock Skids
$$ Possum4757: 40" Light Mounts
$$ Mike Carsner: Rear Corners, Rear Carrier w/Rotopax, Sliders (RAW)
$$ Boogieman: 1st Gen Rear Bumper
$$ DC xterra: 1st Gen Rear Bumper w/ Rotopax Brackets and 40" Light Mount
$$ Apples491: Rear bumper w/ Rotopax
$$ Un4seen4: Rear Carrier and 40" Mounts
$$ schmidt1894: 1st Gen 40" Light Mounts
$$ Lucky_Lefty: RED Shock Skids

KStPeter: Rear Bumper w/ Rotopax Brackets and Rear Corners payment info sent
Mike Nichols: Rear Corners w/ Flush Mounts payment info sent
Jrjones: Rear Bumper w/Rotopax Brackets payment info sent
Reshmax00: 1st Gen Rear Bumper (RAW) payment info sent
Primer: Rear Bumper w/ Rotopax Brackets payment info sent
Autumnintoashes: Rear Bumper w/ Rotopax Brackets payment info sent
OffRdX: Front Plate Bumper/No Hoops w/ Quad 3" Lights, Rear Carrier w/ Rotopax Brackets, Rear AL Corners w/ Lights payment info sent
Fixitguy: Front Plate Bumper w/ Factory Fog Holes, 22" Light Bar w/ 2 Lamp harness and Rear Carrier w/ Rotopax Bracket and 40" Mounts payment info sent
mudchet: Rear Bumper payment info sent
DirtyKevinRice: Rear Carrier w/ Brackets payment info sent
cgregg: Front Plate Bumper w/ Factory Fogs and 22" Light Bar payment info sent
Gentsjack7: 1st Gen Rear Bumper payment info sent
SpongeX: Rear bumper w/ Rotopax (2 CB Tabs) payment info sent
HBIII: Rear Corners (RAW) payment info sent
Strizzo: Front Plate w/ Quad Lights and 22" Bar payment info sent
Malin_Rebate: 1st Gen 40" Light Mounts payment info sent
SyndicateX: Rear Corners payment info sent
RekHavoc: Rear Bumper (RAW) payment info sent
plow80: Tube/Flat Plate Bumper w/ 4" Lights (RAW)
superman465: Rear Corners
AlpineMountain: Standard Sliders (RAW)
tipmn98: Standard Sliders, 40" mounts and Red Shock Skids
Xterra210: Rear Carrier w/ Rotopax Brackets and Rear Light Bar
Kevin Classen: 1st Gen Rear Carrier and Sliders
Chris Murphy: Rear Carrier

 

[schmidt1894]

Just wanting a confirmation that you guys was able to change my shipping address to the Corpus Christi TX Location.

 

[CaptainMorgan_SOS]

I never received anything on how to pay. Let me know. No rush.

 

[schmidt1894]

I never received anything on how to pay. Let me know. No rush.

If you recieved a invoice, it said it in that. Or, you can just go to the first page of this whole thread and the directions should be there.

 

[InSainFab]

Confirmed schmidt1894. 100% of invoices have not been sent out yet.

 

[cgregg]

Was wanting to confirm that you received my payment

 

[InSainFab]

Confirmed. Invoices will go out by end of day.

 

[InSainFab]

Please let me know if you have not received an invoice or need a invoice sent from paypal!! Thank you for your patience!!




CONFIRMED List, Items Will Ship as Ready in this Order (PAID $$) :

$$ jdunker26: Rear Bumper (RAW) SHIPPED 40" Mounts, Sliders
$$ sanders: Rear Bumper w/ Rotopax Brackets
$$ Jordan: Rear Bumper (RAW)
$$ D'Rock: Rear Bumper w/ Rotopax Brackets
$$ columb0: Front Plate Bumper w/ Hoops and Quad Fog Lights and Red Shock Skids
$$ H.I. McDunnough: Rear Bumper w/ Rotopax Brackets & Rear Corners
$$ snowtrout: Rear Bumper w/ Rotopax Brackets
$$ cutfromabove: Front Tube/Diamond Plate Bumper w/ 4" LED's, Rear Bumper & Rear Corners
$$ zball94: Front Plate Bumper, Factory Fog Holes, Headlight/Grille Hoops, 22" Flood LED (Add Flood Reflectors to make bar 100% Flood) Need to Add KC Covers
$$ maillet282: Rear Bumper and Red Shock Skids
$$ jakedublu: Rear Bumper w/ RotoPax Brackets and Red Shock Skids
$$ Quest4ADV: Rear Bumper w/ RotoPax Brackets (RAW)
$$ Yorkdriver: Rear Bumper, Rear Corners w/ Lights
$$ Jesse Davis: Rear Bumper w/ Rotopax Brackets
$$ Wildcard1: Rear Bumper w/ Rotopax Brackets
$$ Blk11Xterra: Rear Bumper SHIPPED Black Shock Skids
$$ JeffPro4X: Rear Bumper
$$ dkoch7: Rear Bumper w/ Rotopax Brackets (2-2gal.), Front Slotted Bar, Black Shock Skids
$$ NWX: Rear Bumper w/ Rotopax Brackets (RAW) SHIPPED 40" Mounts
$$ GuerillaXT: Rear Corners and Black Shock Skids
$$ Expaladin: Sliders and Red Shock Skids
$$ User Omega: Rear Bumper NO Carrier
$$ rthinchey: Front Plate Bumper w/ Single Spot Lights (RAW)
$$ Travzilla: Rear Corners (RAW)
$$ Pro-4Xtreme: Front Plate Bumper w/ 22" Bar and Quad 3" Lights, Rear Bumper w/ Rotopax Brackets (RAW) SHIPPED 40" Mounts
$$ Rebelgd: Rear Bumper w/ Rotopax Brackets and Red Shock Skids
$$ npgtech: Rear Corners
$$ cblaxx19: Front Plate Bumper w/ 22" Bar and Quad 3" Lights
$$ Jason Wellman: 1st Gen Rear Bumper
$$ J Everett: Front Plate Bumper w/ Holes for 22" LED, 3" Fogs and Factory Fogs (RAW)
$$ Brambleheart: Front Plate w/ Quad Lights and Rear Bumper w/ Rotopax Brackets
$$ joelwho: Rear Carrier w/ Rotopax Brackets
$$ 02Xterra: 1st Gen Rear Carrier
$$ Firefighter4607: 1st Gen Sliders (RAW)
$$ Vorian: Rear Corners
$$ soldier92r: Rear Bumper w/ Carrier, Rear Corners w/ Lights and Sliders
$$ Trexterra: Front Tube/Diamond Plate w/4" Fogs
$$ kaytiejean05: Rear Bumper w/ Carrier
$$ Kiska2: Front Plate w/ Quad 3" and 22" Light Bar, Rear Carrier w/ Rotopax Brackets and Red Shock Skids
$$ unixmandt: Front Plate Bumper w/ 3" Holes
$$ Yukonart: Sliders
$$ ckline1: Rear Carrier and Black Shock Skids
$$ Possum4757: SHIPPED 40" Light Mounts
$$ Mike Carsner: Rear Corners, Rear Carrier w/Rotopax, Sliders (RAW)
$$ Boogieman: 1st Gen Rear Bumper
$$ DC xterra: 1st Gen Rear Bumper w/ Rotopax Brackets and 40" Light Mount
$$ Apples491: Rear bumper w/ Rotopax
$$ Un4seen4: Rear Carrier SHIPPED 40" Mounts
$$ schmidt1894: 1st Gen 40" Light Mounts
$$ Lucky_Lefty: RED Shock Skids
$$ lwink: Red Shock Skids
$$ johnb: SHIPPED 40" Front Mounts
$$ ccotter: SHIPPED 40" Front Mounts
$$ 08XOR: SHIPPED 40" Light Mounts and Red Shock Skids
$$ Mnemonic: SHIPPED Front 40" Mounts
$$ Labbie: SHIPPED [Standard Sliders (RAW)
$$ samuel313: SHIPPED Standard Sliders (RAW)
$$ outback97: SHIPPED Sliders (RAW)
$$ dmski: SHIPPED Sliders (RAW)
$$ Fixitguy: Front Plate Bumper w/ Factory Fog Holes, 22" Light Bar w/ 2 Lamp harness and Rear Carrier w/ Rotopax Bracket SHIPPED 40" Mounts
$$ mudchet: Rear Bumper
$$ HBIII: Rear Corners
$$ cgregg: Front Plate Bumper w/ Factory Fogs and 22" Light Bar
$$ DirtyKevinRice: Rear Carrier w/ Brackets
$$ OffRdX: Front Plate Bumper/No Hoops w/ Quad 3" Lights, Rear Carrier w/ Rotopax Brackets, Rear AL Corners w/ Lights
$$ AlpineMountain: Standard Sliders (RAW)
$$ tipmn98: Standard Sliders, 40" mounts and Red Shock Skids
$$ superman465: Rear Corners
KStPeter: Rear Bumper w/ Rotopax Brackets and Rear Corners payment info sent
Mike Nichols: Rear Corners w/ Flush Mounts payment info sent
Jrjones: Rear Bumper w/Rotopax Brackets payment info sent
Primer: Rear Bumper w/ Rotopax Brackets payment info sent
Autumnintoashes: Rear Bumper w/ Rotopax Brackets payment info sent
Gentsjack7: 1st Gen Rear Bumper payment info sent
SpongeX: Rear bumper w/ Rotopax (2 CB Tabs) payment info sent
Strizzo: Front Plate w/ Quad Lights and 22" Bar payment info sent SHIPPED 40" Mounts
Malin_Rebate: 1st Gen 40" Light Mounts payment info sent
SyndicateX: Rear Corners payment info sent
RekHavoc: Rear Bumper (RAW) payment info sent
plow80: Tube/Flat Plate Bumper w/ 4" Lights (RAW) payment info sent
Xterra210: Rear Carrier w/ Rotopax Brackets and Rear Light Bar payment info sent
Kevin Classen: 1st Gen Sliders payment info sent
Chris Murphy: Rear Carrier payment info sent
korndog1284: Front Plate Bumper w/ 22" and 1 Set of Fogs, Sliders, Rear Corners w/ Lights and Rear Carrier w/ Rotopax Brackets payment info sent
D town xterra: Rear Corners payment info sent
CaptainMorgan_SOS: 1st Gen 40" Mounts payment info sent
doo: Rear Bumper NO Carrier payment info sent

 

[InSainFab]

2" BL Rear:

 

[DC xterra]

some good looking hardware

 

[metzican]

someone has been busy!!!! I keep looking for my stuff in the background of these photo's and I can't find it

 

[Gentsjack7]

I still need a Paypal invoice.

 

[InSainFab]

^^Sent

 

[InSainFab]

ANYONE NEED AN INVOICE?
SpongeX: Rear bumper w/ Rotopax (2 CB Tabs) payment info sent
Xterra210: Rear Carrier w/ Rotopax Brackets and Rear Light Bar payment info sent
korndog1284: Front Plate Bumper w/ 22" and 1 Set of Fogs, Sliders, Rear Corners w/ Lights and Rear Carrier w/ Rotopax Brackets payment info sent
doo: Rear Bumper NO Carrier payment info sent

 

[metzican]

I still need a invoice for my custom ordered pieces. And a shipping invoice... Everything was suppose to be shipped Yesterday... (Not part of this group buy)

 

[drbandkgb]

yeah buddy..?its time to remove the gorilla and add the IF

 

[InSainFab]

I still need a invoice for my custom ordered pieces. And a shipping invoice... Everything was suppose to be shipped Yesterday... (Not part of this group buy)

PM Incoming

yeah buddy..?its time to remove the gorilla and add the IF

That's awesome!!!

 

[cgregg]

Bout when will the bumpers be ready to ship? Can't wait to get it on my X lol

 

[InSainFab]

This will be the LAST production based post we will make until 4/5/15. You will know when your item(s) are ready when you receive your shipping invoice. The shop is busy with lots of new products and we are working on normal production and local customers by day and cranking out GB stuff any free minute we have. The weather will always put us behind with powder coat (they do their blasting outside) but we are working like crazy to deliver a quality product within the given time frame. When I made the post below we probably had 1/2 the orders we finished with, so please be patient and I will personally guarantee this will not turn into a 8 month fiasco like other Bumper GB's and I will update the remaining orders that have not shipped come 4/5/15. Thank you for the support and patience.

"We would like to have 100% of the powder coated items shipped by 4/5/15 depending on confirmed list, but our goal is to have 100% of them to you, with enough time to install before GoneMoab2015!"

 

[schmidt1894]

Are you going to ship out other products besides the bumpers first? Or go in order? Or do all the big stuff then get to the smaller stuff?