RM975
First Fill-Up (of many)
- Location
- Templeton, Ca
Hey there, I am and I do. PM me an address so I can check rates.
Yup. Sending PMAre you still making these?
Sending PMI’m interested!
Sending PMI'm going to need this.
Sending PMInterested!!!
InterestedSoon there will be a plug n play option for those that want to have full control over their factory locker. This interface will plug in between your chassis harness and the "computer" that controls your locker. This is based on the mod that doesn't give you warning lights and does not require extra switches or relays. It uses factory style connectors, if you can work a locking style plug, you can install this thing. No wiring work required. I currently have parts to build 5 and am assembling the prototype for a local X that does not have the wiring mod.
View attachment 14084
PM sentInterested
Same here, I need one of these mods. Any info on what is my next step? ThanksRyan, I literally joined to purchase this lol how can I go about picking one up from you? Thanks!
Send me a message on how to proceed as well, ThanksPm sent
Same here, I need one of these mods. Any info on what is my next step? Thanks
Send me a message on how to proceed as well, Thanks
Pm sent
I would like to buy one please. PetrosSoon there will be a plug n play option for those that want to have full control over their factory locker. This interface will plug in between your chassis harness and the "computer" that controls your locker. This is based on the mod that doesn't give you warning lights and does not require extra switches or relays. It uses factory style connectors, if you can work a locking style plug, you can install this thing. No wiring work required. I currently have parts to build 5 and am assembling the prototype for a local X that does not have the wiring mod.
View attachment 14084
Soon there will be a plug n play option for those that want to have full control over their factory locker. This interface will plug in between your chassis harness and the "computer" that controls your locker. This is based on the mod that doesn't give you warning lights and does not require extra switches or relays. It uses factory style connectors, if you can work a locking style plug, you can install this thing. No wiring work required. I currently have parts to build 5 and am assembling the prototype for a local X that does not have the wiring mod.
View attachment 14084
I would like to buy one please. PetrosSoon there will be a plug n play option for those that want to have full control over their factory locker. This interface will plug in between your chassis harness and the "computer" that controls your locker. This is based on the mod that doesn't give you warning lights and does not require extra switches or relays. It uses factory style connectors, if you can work a locking style plug, you can install this thing. No wiring work required. I currently have parts to build 5 and am assembling the prototype for a local X that does not have the wiring mod.
View attachment 14084
Sending PMI would like to buy one please. Petros
As I understand it, the M226 Factory Locker will only engage in 4Low @ under 4mph? So with this mod, you're saying this will allow me to use the locker in 4Hi while I'm driving on the beach @10-15mph & I can turn it on/off like I do the 4WD, on the fly??IF your X didn't come with the locking 226 from the factory, you don't need this mod. Factory equipped locking X's come with a controller (DLCU) that only allows locker engagement in 4lo with a wheel speed at and under 4 mph. This reduces liability to Nissan in that there is less of a chance of locker engagement at an inappropriate time. Anyone who has an aftermarket locker in their vehicle has the ability to lock there diff at the wrong time. With you wiring direct control power to your transplanted axle, you will be able to engage it at anytime.
Thanks."As I understand it, the M226 Factory Locker will only engage in 4Low @ under 4mph?"
Correct
"So with this mod, you're saying this will allow me to use the locker in 4Hi while I'm driving on the beach @10-15mph & I can turn it on/off like I do the 4WD, on the fly??"
Yes
Sending PMI am new and would like to purchase one.
PM sentI would like to buy one
Yep, if the teeth are that far off, it may take some movement for things to line up and the halves to mesh together. This isn't affected by the mod, it would have taken that much movement to get a lock of you were stock.Well, got around to installing today, put in neutral and turned on diff lock, nothing happened, moved back and forth, nothing, turned the wheel while moving forward then back ward, nothing, parked, put in neutral again, turned the diff lock off, then back on, engaged! Very happy!
will this mod plug & play wth 2022+ Model (3rd Gen) Frontiers?Yep, if the teeth are that far off, it may take some movement for things to line up and the halves to mesh together. This isn't affected by the mod, it would have taken that much movement to get a lock of you were stock.
Enjoy!
Hey Rippiewill this mod plug & play wth 2022+ Model (3rd Gen) Frontiers?
Soon there will be a plug n play option for those that want to have full control over their factory locker. This interface will plug in between your chassis harness and the "computer" that controls your locker. This is based on the mod that doesn't give you warning lights and does not require extra switches or relays. It uses factory style connectors, if you can work a locking style plug, you can install this thing. No wiring work required. I currently have parts to build 5 and am assembling the prototype for a local X that does not have the wiring mod.
View attachment 14084
Hey there. Yup, I have units and have had quite a few Canadian buyers. Sending PM.Hello, I was hoping you were still making the Diff lock bypass plug and play. I am in Vancouver Canada, please let me know if you have any pigtails and can ship to Canada. Let me know what I can do to purchase one.Cheers