RLC Welding and Fabrication
- Thread starter Xterraforce
- Start date
- Location
- Signal Mtn., TN
They are $87.41 at O'Reilly Auto Parts. They are ordered through Keystone and take two or three days to come in.
SKAVYNGR
Need Bigger Tires
- Location
- Lexington, KY
Does James need the vehicle for measurements or does he have the schematics? I'm debating on grabbing mine from there, just because it's close by.
I would think he may need the xterra
Jack Stilts
Skid Plates
- Location
- Michigan
For the front bumper? Naw, you can just email / call with what you'd like and he'll build it 
caseycamby
Suspension Lift
- Location
- Marion, NC
RLC is a top notch bumper. Definitely a recommend!
Might as whore myself out and show it off while I'm here!
Might as whore myself out and show it off while I'm here!
- Location
- Gulfport, MS
Awesome!!! They need to make 2nd Gen bumpers!!!
- Location
- Denver Adjacent
- Location
- Gulfport, MS
Yea, that's the only one he's done and I don't like that design. I emailed him about doing one for me and having it look like the first gens and was told pretty much that it wasn't possible. I guess he didn't keep a "template" for it cause he wanted me to leave it with him. I'm not worried though, I won't be getting one anytime soon. If I do go with him, I'm sure he wouldn't have any problems designing it and making it happen. Seems like a cool guy, I'm sure he's super busy too
SKAVYNGR
Need Bigger Tires
- Location
- Lexington, KY
Casey, that's a good looking bumper.
caseycamby
Suspension Lift
- Location
- Marion, NC
Thank you! :bmmd:
CaptainMorgan_SOS
Need Bigger Tires
- Location
- Alamogordo, NM
I have been away for a while because of the move, but I ordered mine a while back and hope to paint it up and have it mounted within the next week or so.
Tay-Lo
I'm the king of junk food!
- Location
- Upstate SC
Did you have to special request that? Cause I likey
CaptainMorgan_SOS
Need Bigger Tires
- Location
- Alamogordo, NM
Yeah, I special ordered the front hitch, had him do a little thicker tube than normal, do the fogs to where the stock ones will fit, add light tabs under the hoop to where I could put some 8" Hellas or a LED bar (I am not sure which I will go with yet) and I had him do a custom touch on the sides to where the stock side marker lights will fit. I am really happy with his work and how he was able to accommodate all of my requests.
So SL, sliders, OBA and steering are all next on the list and hopefully a front locker if I can scrape together the funds. I ended up putting a tiny dent in my rocker yesterday in this spot; there are a lot of rocks out here:
Repping XN there on the side glass on both sides and on the rear in the top left corner
So SL, sliders, OBA and steering are all next on the list and hopefully a front locker if I can scrape together the funds. I ended up putting a tiny dent in my rocker yesterday in this spot; there are a lot of rocks out here:
Repping XN there on the side glass on both sides and on the rear in the top left corner
Last edited:
caseycamby
Suspension Lift
- Location
- Marion, NC
Yeah he'll definitely hook you up! Awesome guy to work with.
Tay-Lo
I'm the king of junk food!
- Location
- Upstate SC
Gah that looks so good....but I have a chance to get a shrock bumper sooooo cheap....I'm so conflicted
HAPPY!
Looks great man!!!
ymbhonk
First Fill-Up (of many)
- Location
- Puyallup, WA
His bumpers are looking better and better
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Sent from my SAMSUNG-SGH-I747 using Tapatalk
- Location
- Denver Adjacent
I mailed a box of goodies to James today. Some things I want mounted in my bumper. Should be putting the deposit down this week.
/excited
/excited
Chetter
First Fill-Up (of many)
- Location
- Chattanooga, TN
Same here....finally pulling the trigger....
Finally....
Finally....
Jack Stilts
Skid Plates
- Location
- Michigan
YES! Awesome news.
- Location
- Denver Adjacent
The big question..... Paint or powder coat?
Jack Stilts
Skid Plates
- Location
- Michigan
You know my bumpers & sliders are powder coated. I'm a big fan. Although the sliders are slippery when wet.
I'm actually going to strip my DepHep and get that powder coated, too. One vote for!
Plus, wouldn't the powder coat come close to matching the finish of the rear Schrock?
I'm actually going to strip my DepHep and get that powder coated, too. One vote for!
Plus, wouldn't the powder coat come close to matching the finish of the rear Schrock?
- Location
- Denver Adjacent
Valid point. However PC likes to fade in the sun.
- Location
- Amarillo, TX
......obviously the answer is bedline (brushed on)
- Location
- Amarillo, TX
- Location
- Denver Adjacent
Negative.
- Location
- Amarillo, TX
pretty sure it is....after all, it's tough, and, if you brush it right, it's pretty smooth (mine came out great)
- Location
- Amarillo, TX
exactly my train of thought....
CaptainMorgan_SOS
Need Bigger Tires
- Location
- Alamogordo, NM
I used Duplicolor bumper coating. REALLY easy to prep and easy to touch up if you need to, and I think it looks pretty good.
- Location
- Denver Adjacent
The rustoleum pro flat black that I used on the roof rack is holding up really well. So I'm kind of on the fence about it.
Ddog346
Bought an X
- Location
- Coventry, CT
Just sent him a quote request today. Asked for one very similar to Casey's, except I asked for slightly shorter tube work, have it line up with everything just a bit better. Love the look of all of these bumpers, RLC does great work!
Jack Stilts
Skid Plates
- Location
- Michigan
I am so glad to see such an increase in popularity of these over the last year or two. His work is so great and I get excited every time I see a new one on a different truck.
caseycamby
Suspension Lift
- Location
- Marion, NC
Awesome!!! Excited to see it!