Turn signals/indicators not working, but hazards work.

[Dimo]

Long story short, installed a new head unit after the old one died. Now everything else works, hazards, headlights and all, but the turn signals as well as the indicators for the turn signals do not work. The indicators work for the hazards though. I have checked all the basics already, but suggest whatever comes to mind since I'll have to recheck it all anyways. I've done a quite a bit of searching and found others with this issue after a head unit install, but never a solution. Thanks in advance.

 

[Prime]

Has to be something in the hazard switch wiring harness. Check and make sure you didn't lose a wire on the hazard plug.

 

[Dimo]

Thanks prime, I started looking again and turns out that was close to the issue. One of the metal connectors on the hazard relay was bent just enough to fit under the female end connector rather than in-between. Problem fixed.