- Location
- Ashburn, VA
Looking for some help with part numbers. I believe I have a bad driver side front wheel bearing. Looking at Rockauto, the needed parts appear to be bearings, races, and seals for inner and outer? They don't look too expensive. However, when doing my Youtube checks on how to replace everything, I see folks replacing a much larger part they refer to as the hub assembly. It comes with an ABS sensor already installed. I can't tell in the videos but it looks like that is a Gen 2 thing? Can anyone tell me the part numbers I need to replace all the "guts". I want to replace all the bearings, seals, whatever is in there. I've got a funky clunking noise on slow turns and think the wheel bearing is the culprit. All the ball joints and tie rods have been done.
Next question. I'm looking to upgrade to manual hubs. I know WARN is the king, but I see some complaints about the double threaded bolts used to attach them. I also see other hubs that don't come with the double threaded bolts or nuts, just the longer hex head bolts that attach the hub to it's carrier. Can I get those double threaded bolts at the local Home Depot or Lowe's? What thread pattern or length do I need? More importantly, what the hell are those actually called? I'm sure double threaded bolts is not the technical term.
Next question. I'm looking to upgrade to manual hubs. I know WARN is the king, but I see some complaints about the double threaded bolts used to attach them. I also see other hubs that don't come with the double threaded bolts or nuts, just the longer hex head bolts that attach the hub to it's carrier. Can I get those double threaded bolts at the local Home Depot or Lowe's? What thread pattern or length do I need? More importantly, what the hell are those actually called? I'm sure double threaded bolts is not the technical term.