- Location
- Ontario, Canada
Last edited:
Davcos Build Thread
- Thread starter Davcos
- Start date
Congrats! It looks like it has come a lonnnnnggggg way since you acquired it, that's for sure! Awesome X man, keep up the great work!
Jack Stilts
Skid Plates
- Location
- Michigan
You have one of the coolest 1st Gens I've seen.
I wish Shrockworks would offer the bumper hoop like the one you have. That angled hoop is way cooler than theirs.
I wish Shrockworks would offer the bumper hoop like the one you have. That angled hoop is way cooler than theirs.
- Location
- Ontario, Canada
Thanks man, & I agree with the hoop angle
- Location
- Ontario, Canada
dead pix
Last edited:
- Location
- Hainesville IL
since your in Canada is it the subi a true JDM right hand drive?
- Location
- Ontario, Canada
Sad day for the X, was out doing some errands, went to start and truck.. and nothing. doesn't even turn over. Battery is only 1 year old and all electronics seem to be working fine so.. maybe starter or fuel pump? 
Pro-2X
Suspension Lift
- Location
- Rockmart, GA
Fuel Pump wont stop it from turning over.
- Location
- machesney park IL
Put it in drive then back in park to make sure the park neural switch isn't sticking inhibiting a start. If you drive manual then make sure you are pushing the clutch down far enough. Check all the terminals check to see if the starter solenoid is stuck. Have someone turn the key while you tap the solenoid with a hammer.
- Location
- Ontario, Canada
Yup that's what it ended up being it looks like, no more problems since. I didn't even think to check that, thanks
- Location
- Ontario, Canada
Re uploaded most of my pictures on page 1. I always used imageshack for uploading but twice I ended up losing all my pictures so im giving photobucket a try now
Last edited:
CaptainMorgan_SOS
Need Bigger Tires
- Location
- Alamogordo, NM
Very clean looking X you have there! It even matches the Impreza.
- Location
- Ontario, Canada
You can delete both my build threads
CaptainMorgan_SOS
Need Bigger Tires
- Location
- Alamogordo, NM
Wuh?
- Location
- Dickinson, TX
I can't see any pictures!!
Resub'd post.
Resub'd post.
- Location
- Ontario, Canada
I thought I was done with the X, as far as wheeling went, wasn't really into it anymore (no one close by to wheel with).... but my friend just bought a rubicon and we want to do lots of wheeling this summer so I suppose its time to dump more money into the X
Tomorrow I'll be ordering HD TRA's, shrockworks skidplates & hopefully in about a month or so I'll be able to get new 32x11.50 KM2's
Tomorrow I'll be ordering HD TRA's, shrockworks skidplates & hopefully in about a month or so I'll be able to get new 32x11.50 KM2's
CaptainMorgan_SOS
Need Bigger Tires
- Location
- Alamogordo, NM
Nice! Now, where'd all the pics go?
Soo glad you decided to keep wheeling/building it. Your X is awesome man. So much hard work into it. I really enjoy following your build.
- Location
- Ontario, Canada
Thanks, This year should be pretty fun.
and uhhhh this happened today. broken leaf on both sides..
and uhhhh this happened today. broken leaf on both sides..
- Location
- Ontario, Canada
Not sure, I'll have to take a closer look later today, I'm guessing one side was already broken or getting close to breaking, and then yesterday when I was just driving down the street the other one gave out, was a pretty loud bang
- Location
- Hainesville IL
if i were you, id replace both leaf packs in full. the other leafs could have hair line cracks from age.
- Location
- Ontario, Canada
Leafs have been replaced, shrock skids,TRA's & KM2s ordered.
Hooked my buddy up with a 50" light bar and spent the day installing it. Took the whole day since the windshield bolts were loaded with loctite, some of the heads stripped and it wasn't fun at all but I finally got it done
Hooked my buddy up with a 50" light bar and spent the day installing it. Took the whole day since the windshield bolts were loaded with loctite, some of the heads stripped and it wasn't fun at all but I finally got it done
- Location
- Ontario, Canada
32x11.50 KM2's
Last edited:
- Location
- Probably in class..
Those look so clean. Very solid choice my friend.
Sent from space and stuff
Sent from space and stuff
- Location
- Smyrna, TN
- Location
- Ontario, Canada
Welcome to the club.
Thanks
I'm loving these tires already, they ride real smooth & quite. So glad I didn't go for 31's again
- Location
- Ontario, Canada
In the past week or so i've..
-Replaced leaf springs on both sides
-Ordered HD TRA's
-Ordered shrockworks skid plates
-(4) 32x11.50 KM2 tires
Completely out of mod money for a while now but that should hold me over until summer
-Replaced leaf springs on both sides
-Ordered HD TRA's
-Ordered shrockworks skid plates
-(4) 32x11.50 KM2 tires
Completely out of mod money for a while now but that should hold me over until summer
Last edited:
- Location
- Ontario, Canada
Uploaded some pictures to the first post again
- Location
- Ontario, Canada
When I got the leafs replaced I had told the owner the height I wanted but that message probably never got passed to the installer.When I got home with the truck I wasn't happy with the height (rear wheel gap was lower than front) Went back to the shop today to have them re-arched, they also added another leaf. Did all that work for free so im happy, since I paid top dollar the first time
Before
After
Before
After
- Location
- Probably in class..
Did they really send your truck home with that much sag?
Anyway, the new arched springs look great.
Anyway, the new arched springs look great.
- Location
- Ontario, Canada
Pretty terrible right? The leafs were pretty much sitting on the overload leaf, it was so loud and rough even hitting the slightest bumps in the road.
Rides really nice now and overall im happy.
Wednesday the HD TRA's will be going on
Rides really nice now and overall im happy.
Wednesday the HD TRA's will be going on
- Location
- Hainesville IL
glad shes sitting pretty again.
i just did my HDs. it goes by fast when you got a puller.
Jack Stilts
Skid Plates
- Location
- Michigan
Dang, that's a huge difference. Looks great now.
Also, I'm jealous of how tall your garage is...I barely clear my door by half an inch.
Also, I'm jealous of how tall your garage is...I barely clear my door by half an inch.
- Location
- Ontario, Canada
If you are referring to the last few pics.. I WISH that was my garage lol, that was the suspension shop. The X barely fits in my garage with the roof basket on it
Got the new TRA's on the truck today... now it's just a waiting game for my shrock skids to get here
Got the new TRA's on the truck today... now it's just a waiting game for my shrock skids to get here
Jack Stilts
Skid Plates
- Location
- Michigan
Ah crap. Bummer
Beefy steering FTW!
Beefy steering FTW!
- Location
- Ontario, Canada
Shrock skids got shipped out today and will be here on Monday hopefully. Ordered them exactly 1 month ago so that wasn't bad at all
metzican
Suspension Lift
- Location
- Lafaytte, la
That is the best turn around I think I ever heard of. Nice to hear the shop redid the work for free sounds like a good place.